Accessories
High Current Cables HKS (Standard) and HKV-F (Super Flexible)
Description
Flexible and super flexible cables in different lengths, cross sections and voltage strengths with cable lugs, wire end ferrules or plugs. Color coding at cable lug. Two leads are always required for device connection. For higher currents several cables are connected in parallel.
High Current Cables HKV-F16Con (for ZSAC Series)
The HKV-F16Con high-current cables are manufactured with an SB6 jack at one end which fits Electronic ZSAC Loads with SBU6-125 terminals. 1 set HKV-F16Con/O-2 cables (red and black) is included as standard with all Electronic ZSAC Loads with SBU6-125 terminals.
High Current Cables HKL-I (Low Induction)
Description
For dynamic load with high rise times and for long load lines. These double cables enable the voltage of the test unit to be supplied to the load input with very low inductive losses. Only in this way it is possible to realize fast current rise times.
Maximum voltage: 300 V
Master-Slave Cables
Description
For Master-Slave operation of 2 equal devices (exception: ACL series for 3 equal devices).
Length: 2 m each
Order no.:
PLI Series: K-MS-PLI, K-MS-CAN
PLA Series: K-MS-PLA, K-MS-CAN
ACL Series: K-MS-ACL
ZS Series: K-MS-ZS
19″ Racks
Description
The installation of electronic loads requires special racks which are designed for adequate air outlet of the heated exhaust air.
H&H racks are fitted with large scale air vents at the back to allow exhaust air to be blown out practically unhindered.
The rear door is shorter to accomodate the connection cables.
Installation depth: 675 mm