Digital Master-Slave operation at PLA loads

To increase the power or current capability up to 5 Electronic Loads of equal type can be operated in parallel in Master-Slave mode as one system.

The Master unit controls the total input current of the system. This unit also shows the system’s total measurement values at its display and returns them in case of query via one of the data interfaces. The voltage measured at the Master unit is the base for the controlled settings in voltage mode, power mode and resistance mode.

What you need:

• 1 cable K-MS-PLA per Slave unit
• 1 cable K-MS-CAN per Slave unit
• firmware revision 2.0.x or higher in each system unit (Master and all Slave units)

Please contact our support staff if you want to update the firmware of your PLA loads.